MCM Tile Leather Effect

What are the construction schemes of MCM Tile for different walls? In the MCM Tile construction project, due to the different characteristics of each project, there are often many different wall base, so the construction scheme of each kind of wall is also different. Today, I will talk about what kind of construction scheme should be adopted when MCM Tile is facing different wall base.

1, New wall

It is the new wall that has just been built. The walls less than half a year are all new walls. Before the construction of the new wall, the cement mixture originated from the wall surface contains a certain alkali content. If the time is not long, it will not completely contact with the air to produce chemical reaction, and the surface still has a certain alkalinity. All in the tile before the wall surface treatment, first brush a layer of alkali inhibitor, and then tile, this can effectively achieve imitation alkali alkali resistance.

2, Old wall

There are three kinds of old walls in general:

1. Ceramic tile wall

For the ceramic tile wall, if the ceramic tile is not removed, two confirmation should be made first. The first is whether the ceramic tile on the wall is stable and whether it will fall off. If it does not fall off, a layer of interface agent can be directly applied on the surface to enhance the stable structure of the wall surface, and then the tiling can be carried out. If the ceramic tile is loose and has to fall off, it needs to be scraped off directly and then applied with the interface agent, The potholes are filled with adhesive directly.

2. Painted wall

If the coating has peeling or falling off, the whole wall needs to be cleaned and removed even if there is a little bit of it. (the reason for this phenomenon is that the coating has reached its service life, and the bottom has been damaged, so it must be removed completely, otherwise any bottom will be loose, which will cause the material to fall off). Then brush the interface agent to clean the wall, and finally paste MCM Tile.

3. If there is no water leakage on the cement wall, the brick can be directly fixed by pulling wire. The premise is that the wall is flat. If there is water leakage, waterproof coating should be made at the bottom layer first, and then pasted with MCM Tile

Hot Tags: MCM tile leather effect, suppliers, manufacturers, factory, customized, wholesale, buy, cheap, low price, free sample, Waterproof Fireproof MCM Wallpaper, Decorative MCM Sandstone Tile, MCM Facing Brick, MCM Tile Leather Effect, MCM Oasis Stone Tile